Update README.md

README.md

-# Cisco NTP [(Download the MKP package)](/../../../-/raw/master/{REPLACE_WITH_PACKAGE_NAME}.mkp "Download MKP package")
+# Check Point MHO buffers [(Download the MKP package)](/../../../-/raw/master/checkpoint_mho_buffers.mkp "Download MKP package")
 
-Monitors status of C{REPLACE_WITH_PACKAGE_TITLE}
+Monitors status of Check Point Orchestrator (MHO) port RX buffers
 ---
 Check Info:
 
-* *service*: creates the service **_NTP status_** and one service **_NTP {item}_** for each NTP association, with the association name/ip-address as item
+* *service*: creates the service **_RX buffers port {item}_** for each MHO port, with the port index as item
 ---
-* *state*: \
-    **warning**: 
-    * if NTP refID is in AUTH, AUTO, CRYPT, DENY, INIT, LOCL, RATE, STEP, TIME or XFAC (see WATO)
-    * if Error counter > 0 (see WATO)
-
-    **critical**/**warning**: 
-    * if offset or stratum outside the configured levels (see WATO)\
+* *state*: always OK
 ---
 * *wato*: [(see WATO options)](/../../../-/raw/master/doc/wato.png "see sample screenshot")
 ---
 * *perfdata (if avilable)*: 
-    * Offset (s)
-    * Delay (s)
-    * Jitter (s)
-    * Protocol errors (/s)
-    * Version errors (/s)
+    * RX buffer 0 discards/s
+    * RX buffer 0 frames/s
+    * RX buffer 0 octets/s
+    * RX buffer 1 discards/s
+    * RX buffer 1 frames/s
+    * RX buffer 1 octets
+    * RX buffer 2 discards/s
+    * RX buffer 2 frames/s
+    * RX buffer 2 octets/s
+    * RX buffer 3 discards/s
+    * RX buffer 3 frames/s
+    * RX buffer 3 octets/s
+    * RX buffer 4 discards/s
+    * RX buffer 4 frames/s
+    * RX buffer 4 octets/s
+    * RX buffer 5 discards/s
+    * RX buffer 5 frames/s
+    * RX buffer 5 octets/s
+    * RX buffer 6 discards/s
+    * RX buffer 6 frames/s
+    * RX buffer 6 octets/s
+    * RX buffer 7 discards/s
+    * RX buffer 7 frames/s
+    * RX buffer 7 octets/s
 ---
 #### Want to contribute?
 Nice ;-) Have a look at the [contribution guidelines](CONTRIBUTING.md "Contributing")
@@ -33,3 +46,7 @@ Sample output
 WATO
 
 ![WATO options](/doc/wato.png?raw=true "WATO options")
+
+WATO options (discovery)
+
+![WATO options (discovery)](/doc/wato-discovery.png?raw=true "WATO options (discovery)")