# Cisco VTP status

Monitors status of Cisco VLAN Trunk Protocol

Check Info:

* *service*: this check will create the service *VTP status*
* *state*: **critical** if VTP domain, mode or version is not as expected
* *wato*: you can configure the expected VTP domain, mode and version.\
          For this three values you can configure the service state if the VTP value of the monitored device is not equal to the expected value. Default is **critical**
    * VTP domain: default: *None*
    * VTP mode: default: *off*
    * VTP version: default *2*
* *perfdata*: 
    * \# of VLANs
    * \# of suspended VLANs

Sample output

![sample output](/doc/sample.png?raw=true "sample [SHORT TITLE]")