# Cisco EIGRP Collection of Ciso EIGRP checks * *cisco_eigrp_as_info*: monitors the EIGRP AS status * *cisco_eigrp_interface*: monitors EIGRP enabled interfaces * *cisco_eigrp_peers*: monitors EIGRP peers (IPv4 only) * *cisco_eigrp_topology_table*: monitors the EIGRP topology table # Check Info *cisco_eigrp_as_info*: * *service*: this check creates one service per EIGRP AS * *state*: **critical** if the EIGRP AS is not found * *wato*: none * *perfdata*: * Neighbour count (count) * Hellos send (/s) * Hellos received (/s) * Updates send (count) * Updates received (count) * Alternate route queries send (count) * Alternate route queries received (count) * Reply packets send (count) * Reply packets received (count) * Acknowledgements send (count) * Acknowledgements received (count) * Highest number of packets in the input queue (count) * Packets dropped from the input queue (count) * Stuck in active (SIA) queries sent (count) * Stuck in active (SIA) queries received (count) * Routes in the topology table (count) * Outstanding replies expected to queries send (count) Sample output ![sample output](/doc/sample_as_info.png?raw=true "sample [SHORT TITLE]") # Check Info *cisco_eigrp_interface*: * *service*: this check creates on service per EOGRP enabled interface and EIGRP AS * *state*:\ **critical** if the EIGRP enabled interface is not found\ **waring** if the EIGRP MD5 authentication on the interface is not enabled * *wato*: you can confgure on withch interface types the check should ignore the missing EIGRP authentication * *perfdata*: * Peer count (count) * Reliable queue length (count) * Unreliable queue length (count) * Average smooth round trip time (ms) * Routing updates awaiting transmission (count) * Reliable multicasts send (count) * Unreliable multicasts send (count) * Unreliable unicasts send (count) * Reliable unicasts send (count) * Multicast exceptions received (count) * Conditional-Receive packets (count) * Suppressed acknowledgements (count) * Retransmissions send (count) * Out-of-sequence packets received (count) Sample output ![sample output](/doc/sample_interface.png?raw=true "sample [SHORT TITLE]") # Check Info *cisco_eigrp_peers*: * *service*: this check creates on service per EOGRP peer interface and EIGRP AS * *state*:\ **critical** if the EIGRP peer is not found **warning** if the EIGRP uptime less min uptime (default 86400 seconds) * *wato*: **min uptime**: the time befor a peer is considered as stable, the default is 86400 seconds (1 day) * *perfdata*: * Peer uptime (s) * Packets enqueued (count) * Retransmissions (count) * Retries (count) * Smooth round trip time (ms) * Retransmission timeout (ms) Sample output ![sample output](/doc/sample_peers.png?raw=true "sample [SHORT TITLE]") # Check Info *cisco_eigrp_topology_table*: * *service*: this check creates on service EIGRP AS * *state*:\ **critical** if the EIGRP table is not found\ **warning** if SIA or active routes are found * *wato*: you can configure if the check should ignore SIA and/or active routes * *perfdata*: * All routes (count) * Active routes (count) * Stuck in active (SIA) routes (count) * Connected routes (count) * Internal routes (count) * External routes (count) * Summary routes (count) * Static redistributed routes (count) * Inet address (count) Sample output ![sample output](/doc/sample_topo_table.png?raw=true "sample [SHORT TITLE]")