Newer
Older
[PACKAGE]: ../../raw/master/mkp/cisco_eigrp-0.3.0-20230607.mkp "cisco_eigrp-0.3.0-20230607.mkp"
* *cisco_eigrp_as_info*: monitors the EIGRP AS status
* *cisco_eigrp_interface*: monitors EIGRP enabled interfaces
* *cisco_eigrp_peers*: monitors EIGRP peers (IPv4 only)
* *cisco_eigrp_topology_table*: monitors the EIGRP topology table
---
### Download
* [cisco_eigrp.mkp (latest version)](https://thl-cmk.hopto.org/gitlab/checkmk/cisco/cisco_eigrp/-/raw/master/cisco_eigrp.mkp "Download latest version")
---
### Installation
You can install the package by uploading it to your CheckMK site and as site user run `mkp install cisco_eigrp.mkp`.
In the Enterprise/Free edition of CheckMK you can use the GUI to install the package (_Setup_ -> _Extension Packages_ -> _Upload package_)
---
### Want to contribute?
Nice ;-) Have a look at the [contribution guidelines](CONTRIBUTING.md "Contributing")
---
### Check Info *cisco_eigrp_as_info*
* *service*: this check creates one service per EIGRP AS and address family
* *state*: **critical** if the EIGRP AS is not found
* *wato*: none
* *perfdata*:
* Neighbour count (count)
* Hellos send (/s)
* Hellos received (/s)
* Updates send (count)
* Updates received (count)
* Alternate route queries send (count)
* Alternate route queries received (count)
* Reply packets send (count)
* Reply packets received (count)
* Acknowledgements send (count)
* Acknowledgements received (count)
* Highest number of packets in the input queue (count)
* Packets dropped from the input queue (count)
* Stuck in active (SIA) queries sent (count)
* Stuck in active (SIA) queries received (count)
* Routes in the topology table (count)
* Outstanding replies expected to queries send (count)
**Note**: the item name has been chaged to short interface names (Gigabitethernet0/0/0 bocomes Gi0/0/0)
* *service*: this check creates on service per EIGRP enabled interface, EIGRP AS and address family
**critical**
* if no authentication is configured on the interface
* if the EIGRP enabled interface is not found
**waring**
* if the EIGRP MD5 authentication configured on the interface (move to hmac-sha-256)
* *wato*:
* you can confgure on withch interface types the check should ignore the missing EIGRP authentication
* you can configure the check outcome for none/md5 authentication. Default is *critical* for no authentication and *warning* for MD5 based authentication
* *perfdata*:
* Peer count (count)
* Reliable queue length (count)
* Unreliable queue length (count)
* Average smooth round trip time (ms)
* Routing updates awaiting transmission (count)
* Reliable multicasts send (count)
* Unreliable multicasts send (count)
* Unreliable unicasts send (count)
* Reliable unicasts send (count)
* Multicast exceptions received (count)
* Conditional-Receive packets (count)
* Suppressed acknowledgements (count)
* Retransmissions send (count)
* Out-of-sequence packets received (count)
* *service*: this check creates on service per EOGRP peer interface, EIGRP AS and VRF (IPv4 and IPv6)
* *state*:\
**critical** if the EIGRP peer is not found
**warning** if the EIGRP uptime less min uptime (default 86400 seconds)
* *wato*: **min uptime**: the time befor a peer is considered as stable, the default is 86400 seconds (1 day)
* *perfdata*:
* Peer uptime (s)
* Packets enqueued (count)
* Retransmissions (count)
* Retries (count)
* Smooth round trip time (ms)
* Retransmission timeout (ms)
* *service*: this check creates on service per EIGRP AS, address family and VRF
* *state*:\
**critical** if the EIGRP table is not found\
**warning** if SIA or active routes are found
* *wato*: you can configure if the check should ignore SIA and/or active routes
* *perfdata*:
* All routes (count)
* Active routes (count)
* Stuck in active (SIA) routes (count)
* Connected routes (count)
* Internal routes (count)
* External routes (count)
* Summary routes (count)
* Static redistributed routes (count)
* Inet address (count)