From ed98542ef5054c2c0a4626e4cda6945b4b146946 Mon Sep 17 00:00:00 2001 From: thl-cmk <thl-cmk@outlook.com> Date: Sat, 1 Oct 2022 10:33:55 +0000 Subject: [PATCH] Update README.md --- README.md | 102 ++++++++++++++++++++++++++++++++++-------------------- 1 file changed, 64 insertions(+), 38 deletions(-) diff --git a/README.md b/README.md index 554b226..d556c4c 100644 --- a/README.md +++ b/README.md @@ -5,17 +5,17 @@ There is a WATO rule for the check plugin and for the discovery. The are both ca <details><summary>cisco_cellular_lte</summary> -This check plugin will discover all cellular interfaces. If the have a 2G/3G/4G connection attached it will show +This check plugin will discover all cellular interfaces. If they have a connection associated it will show - the connection status -- the roaming state - the values for RSSI, RSRP and RSRQ -- the bits/s in/out +- the Bandwith used in/out - the band used -- the IP-Address associated with this connection and in the deails +- the associated IP-Addresses (IPv4 and IPv6) +- the roaming state - the current channel - the network code - the service typoe @@ -27,13 +27,13 @@ and in the deails </details> <details><summary>inv_cisco_cellular_lte</summary> -This inventory plugin adds under _Networking_ -> _Cellular_ (LTE) the following: +This inventory plugin adds under _Networking_ -> _Cellular (LTE)_: - the IMEI (International Mobile Equipment Identifier) - the IMSI (International Mobile Subscriber Identifier) - the ICC ID (Integrated Circuit Card ID) - the MSISDN (Mobile Subscriber Integrated Services Digital Network Number) -- the Network +- the Network code - the APN (Access Point Nam) - the Service type - the current band @@ -59,51 +59,77 @@ Nice ;-) Have a look at the [contribution guidelines](CONTRIBUTING.md "Contribut --- ### WATO -<details><summary>check plugin</summary> - -Rulename: Cisco cellular LTE\ -Options -- Lower levels for RSRP: default -100dBm/-115dBm -- Lower levels for RSRQ: default -8dB/-15dB -- Lower levels for RSSI: default -75 dBm/-85dBm -- Monitoring state if the device is roaming: default WARN -- Monitoring state if no GSM/LTE profile configured: default WARN -- Monitoring state if the device is not connected: default WARN -- Monitoring state if the modem is not up: default WARN -- Monitoring state if the modem is not online: default WARN +<details><summary>Service monitoring rule</summary> + +| Section | Rule name | +| ------ | ------ | +| Networking | Cisco cellular LTE | + +| Option | Defailt value | +| ------ | ------ | +| Lower levels for RSRP | -100dBm/-115dBm | +| Lower levels for RSRQ | -8dB/-15dB | +| Lower levels for RSSI | -75 dBm/-85dBm | +| Expected Band | LTE Band | +| Monitoring state if current band is not expected band | WARN | +| Monitoring state if the device is roaming | WARN | +| Monitoring state if no SIM card associated | WARN | +| Monitoring state if the device is not connected | WARN | +| Monitoring state if the modem is not up | WARN | +| Monitoring state if the modem is not online | WARN | +| the device is not affected by Cisco Bug ID CSCvt55347 | disabled | + </details> -<details><summary>discovery</summary> +<details><summary>Discovery rule</summary> + +| Section | Rule name | +| ------ | ------ | +| Discovery of individual services | Cisco cellular LTE | + +| Option | Defailt value | +| ------ | ------ | +| do not Discover interfaces without associated SIM card | disabled | -Rulename: Cisco cellular LTE\ -Options -- Discover not configured interfaces: default disabled </details> -<details><summary>inventory plugin</summary> +<details><summary>HW/SW inventory rules</summary> The inventory plugin is not configurable. </details> --- ### Check Info -* *service*: creates the service **_Cellular_** for each cellular interface with the cellular_interface_name as item +The plugin creates the service **_Cellular_** for each cellular interface with the **_cellular_interface_name_** as item ---- -* *state*: - * **warning**: - * if no GSM/LTE profile is configured - * if +<details><summary>Montoring states</summary> + +| State | condition | WATO | +| ------ | ------ | ------ | +| WARN | no SIM card attached to the interface | yes | +| CRIT | connection state not active | yes | +| CRIT | modem state not up | yes | +| CRIT | modem not online | yes | +| WARN | connection is roaming | yes | +| WARN/CRIT | RSSI is below -75dBm/-85dBm | yes | +| WARN/CRIT | RSRP is below -100dBm/-115dBm| yes | +| WARN/CRIT | RSRQ is below -8dB/-15dB | yes | +| WARN | current Band is not as expected | yes | + +</details> + +<details><summary>Perfdata</summary> + +| Metric | Unit | Perfometer | +| ------ | ------ | ------ | +| Input Bandwidth | bit/s | yes | +| Output bandwidt | bit/s | yes | +| RSSI | dBm | no | +| RSRQ | dB | no | +| RSRP | dBm | no | + +</details> - * **critical**/**warning**: - * if ---- -* *perfdata (if avilable)*: - * Offset (s) - * Delay (s) - * Jitter (s) - * Protocol errors (/s) - * Version errors (/s) --- ### Sample Output and WATO -- GitLab